05-17-2011, 02:30 PM
Bont Hybrid Carbon Invader w/ Atom Dubz
http://www.derbysmack.com/bont-hybrid-ca...-dubz.html
Bont Hybrid Carbon
The Bont Hybrid Carbon has been designed for skaters who want a cross between a derby and race boot. This boot is low cut like a race boot but it features a 2mm thick Australian leather outer skin which is extremely tough.
![[Image: BONT-HYBRID-CARBON-DA45-INVADER-DUBZ-600.jpg]](http://www.derbysmack.com/images/thumbnails/2//500/BONT-HYBRID-CARBON-DA45-INVADER-DUBZ-600.jpg)
The Bont Hybrid Carbon boot has an exposed carbon base where as the Bont Hybrid Leather model has a fiberglass based wrapped in leather. Both boots are equally heat moldable.
Carbon composite base
Epoxy resin
Suede-L liner
Hand made 1 piece construction
EVA innersole
Waxed laces
2mm Australian full grain leather outer skin
The trim color choices are the same as the boot color choices + you can also choose from these shiny microfiber colors: Blue, white, black, red, pink, and yellow.
*hese boots typically fit large, please check the Bont sizing chart.
*For custom fit boots, you can email us your feet tracings, click here ($30)
PLATES:
Invader DA45 Suregrip Invader DA45 plate with the all new double action trucks and premium cushions. This plate will take derby to a new level. The Invader DA45 offer superior action for indoor and outdoor recreational skating.
strong cast aluminum chassis
45 degree double action trucks
adjustable 5/8" toe stop
9/32" or 5/16" axle size
WHEELS:
Atom Dubs
Introducing Dubz 2.0 - Featuring Hollow Core Aluminum Technology and a new, bright orange urethane, this is the fastest wheel in our entire line-up!
62mm x 44mm
97A
93A (Coming Soon)
Speed/Derby
BEARINGS:
QUBE 8-Ball
Qube 8 Ball is patterned after the Fafnir bearings of the late 70's usingthe 3D technology. The bearing contains 8 balls instead of the traditional 7 This bearing uses QUBE (pronounced "cube") technology. Qube = Quality, Utilizing Better Equipment
Available 7mm or 8mm
8 balls instead of the traditional 7 allows the load to be spread over the entire bearings.
These bearings are manufacturered using 3D modeling process to digitally map each bearing.
Boots are coming from China and Australia, shipping can take 2-4 weeks for delivery. If a change in size is needed, please contect us. Bont exchange fee is $35. If the boot has been mounted or shows damage, it can NOT be returned/exchanged.
IF IN DOUBT ABOUT YOUR SIZE, PLEASE TRY ON THE BOOTS BEFORE THEY GET MOUNTED!!
LET US KNOW AND WE WILL MAKE ARRANGEMENTS BEFORE THE BOOTS GET MOUNTED.
http://www.derbysmack.com/bont-hybrid-ca...-dubz.html
http://www.derbysmack.com/bont-hybrid-ca...-dubz.html
Bont Hybrid Carbon
The Bont Hybrid Carbon has been designed for skaters who want a cross between a derby and race boot. This boot is low cut like a race boot but it features a 2mm thick Australian leather outer skin which is extremely tough.
The Bont Hybrid Carbon boot has an exposed carbon base where as the Bont Hybrid Leather model has a fiberglass based wrapped in leather. Both boots are equally heat moldable.
Carbon composite base
Epoxy resin
Suede-L liner
Hand made 1 piece construction
EVA innersole
Waxed laces
2mm Australian full grain leather outer skin
The trim color choices are the same as the boot color choices + you can also choose from these shiny microfiber colors: Blue, white, black, red, pink, and yellow.
*hese boots typically fit large, please check the Bont sizing chart.
*For custom fit boots, you can email us your feet tracings, click here ($30)
PLATES:
Invader DA45 Suregrip Invader DA45 plate with the all new double action trucks and premium cushions. This plate will take derby to a new level. The Invader DA45 offer superior action for indoor and outdoor recreational skating.
strong cast aluminum chassis
45 degree double action trucks
adjustable 5/8" toe stop
9/32" or 5/16" axle size
WHEELS:
Atom Dubs
Introducing Dubz 2.0 - Featuring Hollow Core Aluminum Technology and a new, bright orange urethane, this is the fastest wheel in our entire line-up!
62mm x 44mm
97A
93A (Coming Soon)
Speed/Derby
BEARINGS:
QUBE 8-Ball
Qube 8 Ball is patterned after the Fafnir bearings of the late 70's usingthe 3D technology. The bearing contains 8 balls instead of the traditional 7 This bearing uses QUBE (pronounced "cube") technology. Qube = Quality, Utilizing Better Equipment
Available 7mm or 8mm
8 balls instead of the traditional 7 allows the load to be spread over the entire bearings.
These bearings are manufacturered using 3D modeling process to digitally map each bearing.
Boots are coming from China and Australia, shipping can take 2-4 weeks for delivery. If a change in size is needed, please contect us. Bont exchange fee is $35. If the boot has been mounted or shows damage, it can NOT be returned/exchanged.
IF IN DOUBT ABOUT YOUR SIZE, PLEASE TRY ON THE BOOTS BEFORE THEY GET MOUNTED!!
LET US KNOW AND WE WILL MAKE ARRANGEMENTS BEFORE THE BOOTS GET MOUNTED.
http://www.derbysmack.com/bont-hybrid-ca...-dubz.html